Recycling

  • image description

    Hammer & Hammer Impact Mills »

    Applications: Hammer and hammer impact mills are suitable for crushing soft to medium hard materials (degrees of hardness according to F. Mohs 2 - 5). For example: agglomerates, coal, limestone, gypsum...

  • image description

    ASM 200 / ASM 400 »

    ASM 200 (20 µm - 25 mm) The ASM 200 is a gravity-screening machine, the three dimensional screening action has a vertical dominance. Due to this motion, the feed material is distributed evenly over...

  • image description

    Drum Mills »

    Application: Discontinuous drum mills are applied to fine and micro pulverization (in the micrometer range) and simultaneous mixing of relatively coarse materials (up to approx. 30 to 40 mm) of all degrees...

  • image description

    GAS 500 / GAS 1000 »

    GAS 500(0,2 - 125 mm) / GAS 1000(4 - 125 mm) The large scale test graders are designed for analysing grain sizes above 40 mm. The sample quantity increases when testing these sizes, by increasing the...

  • image description

    Laboratory Disc Mill »

    For the continuous grinding the model T 750 k in connection could be used with a special continuous grinding chamber. The throughout depends on the material characteristics and the finess of the grinded...

  • image description

    Perflux (for bulk material and suspensions) »

    Impurities contained in powders and suspensions (for example screws, scraps of paper or cleaning rags), can, if they remain undetected, lead to expensive repairs of machines and equipment or may even cause...