Quarrying

  • image description

    SLS 200 (10 to 4000 µm) »

    SLS 200 is intended for the requirements of modern laboratories in respect of a quick, exact, and reproducible grain size analysis of all dry materials for sieving.

  • image description

    Hammer & Hammer Impact Mills »

    Applications: Hammer and hammer impact mills are suitable for crushing soft to medium hard materials (degrees of hardness according to F. Mohs 2 - 5). For example: agglomerates, coal, limestone, gypsum...

  • image description

    LAVIB (20µm - 25mm) »

    A flat screening machine with horizontal circular motion. Due to this circular motion the mobile set of sieves which are mounted on an oscillating table impact against rubber isolators. This dramatically...

  • image description

    Drum Mills »

    Application: Discontinuous drum mills are applied to fine and micro pulverization (in the micrometer range) and simultaneous mixing of relatively coarse materials (up to approx. 30 to 40 mm) of all degrees...

  • image description

    ASM 200 / ASM 400 »

    ASM 200 (20 µm - 25 mm) The ASM 200 is a gravity-screening machine, the three dimensional screening action has a vertical dominance. Due to this motion, the feed material is distributed evenly over...

  • image description

    Circular motion screening machine »

    Applications: Sand and gravel, building materials, rocks, crushed stone, chippings, minerals, ores, pellets, sinter, coal, coke, petrol coke, chemical products, fertilizers, granular material, salts,...